Siemens SOMATOM Spirit Operator'S Manual Download Page 48

Page: 48 / 484

0.0

Information about Personal Safety

Safety

A.2-6

SOMATOM Spirit

0.0

Special instructions on RTP Laser Adjustment

A.2

✧

Ensure that the most recent version of service documenta-
tion is available.

✧

Do not operate laser products without the appropriate
housing.

All legal and product-specific regulations must be followed
when working with lasers.

A.2

Non-compliance with these regulations can lead to injury due to
the hazardous effects of laser beam.

A.2

CAUTION

A.2

Laser radiation!

A.2

Possible loss of eyesight due to laser radiation.

A.2

✧

Do not look directly into the laser beam or at its reflection
on smooth, mirror-like surfaces during adjustment.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Search results

Summary of Contents for SOMATOM Spirit

Reviews:

Siemens SOMATOM Spirit, Operator'S Manual, Page: 48 / 484

Search results

Summary of Contents for SOMATOM Spirit

Reviews: