manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 94 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 94

0.0

0.0

Software Related Safety Information

Safety

A.4-10

SOMATOM Spirit

0.0

Modification of data

A.4

After you have completed processing and evaluation of the 
images, you save your results.

A.4

A.4

A.4

CAUTION

A.4

Modifications in medical images are not saved automatically in 
the same way as image comments! Additionally, in case of a 
user switch where the new user has no adequate access rights, 
modifications of the image text may also be lost.

A.4

Possible loss of image modifications.

A.4

✧

Choose 

Patient > Save As...

 in order to save the image with 

modifications as a new image.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments