manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 249 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 249

Operation

Switching the System On and Off

0.0

04/2012

0.0

D.1-15

0.0

D.1

✧

Click on 

Yes

.

All applications will be closed. The system will continue to shut 
down.

D.1

or

D.1

D.1

✧

Click on 

No

.

You return to the user interface.

D.1

✧

Exit all applications on the user interface.

Switching off the system 

D.1

✓

If no errors occur during shutdown, the computer will be 
switched off.

D.1

✧

Press the 

O 

pushbutton at the UPS at least 3 seconds.

The console will be switched off.

D.1

B

D.1

Unless absolutely necessary, do not switch off the system at the 
main switch provided by the customer or the 

EMERGENCY OFF

 

switch. Otherwise you will have to calibrate the system several 
times when you restart it. 

(→

Page D.1-8 

System checkup and 

calibration

)

D.1

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments