manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 321 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 321

Operation

Positioning the Patient

0.0

04/2012

0.0

D.4-15

0.0

Monitoring patients  

D.4

As long as the table or scanning unit is moving during scanning, 
the patient must always be visible and the intercom system 
must be switched on to hear the patient.

D.4

Special care is required if contrast medium is injected intrave-
nously during an examination with table feed (for example, spi-
ral scans).

D.4

D.4

✧

Press the 

Hear Patient

 key to open the listening connec-

tion.

Stopping system move-
ments and radiation

D.4

D.4

✧

In critical situations press one of the 

STOP

 keys.

All system movements are stopped immediately. Radiation is 
shut down. 

(→

Page A.2-14 

Terminating system movements 

and radiation

)

D.4

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments