manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 385 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 385

0.0

04/2012

0.0

F.3-1

0.0

CHAPTER

F.2

F.3

Constancy Test    

Together with other characteristic values, the daily test values 
are checked for constancy monthly. These tests are performed 
on the complete set of phantoms.

F.3

In addition, the CTDI (CT Dose Index) must be measured at least 
once every six months. The CTDI must also be measured after 
any maintenance work that might have altered the test results.

F.3

i

.3

F

We recommend having the constancy test and the CTDI mea-
surement performed by proper personnel.

F.3

If you want to conduct the constancy test and the CTDI measure-
ment yourself, you must perform all steps of the constancy test 
or the CTDI measurement under your own responsibility.

F.3

Performing the constancy test   

F.3

The monthly quality test is performed via the 

Quality Con-

stancy

 dialog box of the 

Local Service

 window.

F.3

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments