manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 103 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 103

Safety

Software Related Safety Information

0.0

04/2012

0.0

A.4-19

0.0

syngo Body Perfusion CT

A.4

syngo 

Body Perfusion CT provides images of blood flow, blood 

volume and time to peak from one set of dynamic CT images.

A.4

Segmentation

A.4

A.4

A.4

A.4

CAUTION

A.4

Motion artifacts on images!

A.4

Incorrect automatic segmentation.

A.4

✧

After loading of images check images for motion artifacts.

✧

Also check results of segmentation. If not applicable, use 

Reset

 button.

✧

Remove image(s) with motion artifacts.

✧

Then repeat evaluation.

A.4

CAUTION

A.4

Evaluation settings are not adapted!

A.4

Wrong diagnosis.

A.4

✧

Check that the thresholds for CBF and CBV are the intended 
ones.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments