manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 422 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 422

0.0

0.0

Constancy Test

Quality Assurance

F.3-38

SOMATOM Spirit

0.0

Documenting results

F.3

You must enter the test results in the forms supplied. 

(→

System Owner Manual)

F.3

i

.3

F

Test films and test forms must be stored for at least two years.

F.3

You can copy individual report files to diskette.

F.3

✧

In the Report Files dialog box, select the quality tests in the 
list.

F.3

✧

Click 

Copy Selected Reports to Disc (Drive A)

.

The selected reports are transferred to the diskette drive.

F.3

Printing a report

F.3

You can print out an individual report.

F.3

F.3

✧

Click 

Print

.

The displayed report is sent to the connected printer. 

F.3

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments