manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 28 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 28

0.0

0.0

General Safety Information

Safety

A.1-6

SOMATOM Spirit

0.0

Hygiene

A.1

To minimize the risk of infection, all parts must be kept clean at 
all times.

A.1

A.1

Blood, contrast medium

A.1

Blood and contrast medium are health risks.

A.1

✧

Take safety precautions when removing blood or residual 
contrast medium.

Infusions

A.1

The infusion lines must not be under tensile stress.

A.1

✧

Make sure that the infusion lines are long enough and can-
not become caught or crushed by table movements.

Special care

A.1

Take special care when examining infants, small children, obese 
patients or patients who do not keep still or have accident inju-
ries.

A.1

Take the same care when using positioning accessories.

A.1

A.1

CAUTION

A.1

Insufficient cleaning!

A.1

Risk of infection (bio hazard).

A.1

✧

Make sure that the table and positioning aids are clean and 
covered with paper, if possible.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments