manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 239 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 239

Operation

Switching the System On and Off

0.0

04/2012

0.0

D.1-5

0.0

Passing the license check

D.1

Each time you start up the system the software checks whether 
it is correctly installed.

D.1

✧

Check if the operating system starts up without displaying 
a license error message.

f B

D.1

A license error occurs and an error message is displayed. 

D.1

You cannot use the system due to an incorrect license number.

D.1

✧

Call Siemens Service.

D.1

Starting a new system for 
the first time

D.1

✓

When you start a newly supplied system for the first time or 
after new software has been installed, you are asked once 
for the license number of the software.

✧

Enter your license number and confirm your entry.

The license number is checked and stored in the system if it is 
correct. The software starts up.

D.1

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments