manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 75 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 75

Safety

Mechanical Safety

0.0

04/2012

0.0

A.3-3

0.0

Operating conditions

A.3

The following requirements must be fulfilled for operation of 
the system.

A.3

General information

A.3

The system must be operated in rooms that are designated for 
medical use.

A.3

Climatic conditions in the 
room  

A.3

The room temperature and the humidity of the air must not 
exceed the values given in 

(→

System Owner Manual)

A.3

A.3

A.3

CAUTION

A.3

System is operated outside of the specified temperature range!

A.3

Wrong diagnosis possible (artifacts may occur).

A.3

✧

If the working conditions specified cannot be met, the 
room must be equipped with air-conditioning.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments