Siemens SOMATOM Spirit Operator'S Manual Download Page 59 | Manualshive

Page: 59 / 484

Siemens SOMATOM Spirit Operator'S Manual Download Page 59

Safety

Information about Personal Safety

0.0

04/2012

0.0

A.2-17

0.0

Shut down in case of emergency

A.2

In addition to the

STOP

keys at the CT unit,

EMERGENCY OFF

keys to be provided by the customer have to be easily visible and
within easy reach. Country-specific regulations must be
observed.

A.2

B

.2

A

In extreme cases, you can press an

EMERGENCY OFF

key to shut

down the whole system. Radiation and system movements will
be stopped.

A.2

If the power supply of the SOMATOM Emotion computer com-
ponents is not integrated in the

EMERGENCY OFF

system, the

UPS must be unplugged to disconnect the computer compo-
nents from main power.

A.2

You must only press the

EMERGENCY OFF

key:

A.2

❏

If the

STOP

key on the CT system does not respond.

❏

If situations arise that could cause injury to the patient or
user or damage to the equipment (for example, liquids or
particles getting into the equipment, damage of cover
parts, fire).

Only after all causes of danger have been found and remedied,
the unit may be switched on again by a controlled restart.

(→

Restart after System Emergency Stop

)

A.2

B

.2

A

The

EMERGENCY OFF

key interrupts the power supply of the

system. Data can be lost.

A.2

«
...
57
58
59
60
61
...
»

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments