Siemens SOMATOM Spirit Operator'S Manual Download Page 30 | Manualshive

Page: 30 / 484

Siemens SOMATOM Spirit Operator'S Manual Download Page 30

0.0

0.0

General Safety Information

Safety

A.1-8

SOMATOM Spirit

0.0

System movements

A.1

When the gantry or the patient table is moved, the patient or
other people could be injured.

A.1

✧

Make sure that the patient and other people are not in dan-
ger before you execute system movements or scans.

✧

Ensure that no objects can obstruct movement.

Stopping system move-
ments and radiation

A.1

All system movements and radiation can be interrupted in case
of an emergency.

A.1

✧

Make sure that you know where the

STOP

key is located.

✧

Always observe the patient directly. Press the nearest

STOP

key in case of danger.

B

.1

A

You will find

STOP

keys on the gantry and on the control box.

(→

Terminating system movements and radia-

)

A.1

Releasing the patient

A.1

After you have pressed a

STOP

or

EMERGENCY OFF

key or if a

power failure has occurred, no motorized system movements
are possible. However, you can pull the patient out of the open-
ing of the gantry manually.

A.1

✧

Press the lever under the handle of the table top and pull.

(→

Moving the patient table manually

)

✧

Release the table top to retract the table top with the
patient.

«
...
28
29
30
31
32
...
»

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments