manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 254 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 254

0.0

0.0

Switching the System On and Off

Operation

D.1-20

SOMATOM Spirit

0.0

Restart

D.1

When the system is ready to be restarted after shutdown, a mes-
sage is displayed.

D.1

i

D.1

If the temperature in the gantry rises above a maximum value, 
for example, as the result of a defective cooling system, the gan-
try is automatically switched off. A message appears stating 
that the gantry is no longer ready for operation.

D.1

When it has cooled down, the gantry automatically switches on 
again. A message stating this fact appears.

D.1

Resolving the temperature 
warning

D.1

✓

Temperature warning dialog box is displayed.

✓

Countdown has started.

✧

Finish the current examination and check the cooling sys-
tem.

✧

Confirm with 

OK

 in the dialog box displayed.

The dialog box is closed.

D.1

i

D.1

A text is displayed in the status bar during countdown.

D.1

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments