manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 61 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 61

Safety

Information about Personal Safety

0.0

04/2012

0.0

A.2-19

0.0

Radiation shielding

A.2

If scans have to be released from inside the control area or if 
accompanying personnel have to remain there, safety measures 
have to be taken (lead aprons, protective walls, and so on).

A.2

Radiation warning lamps

A.2

A.2

The radiation warning lamps on the gantry operator panels, on 
the control box as well as site radiation warning lamps to be pro-
vided by the customer must light up if scanning has been trig-
gered.

A.2

If a radiation warning lamp does not light up once a scan has 
been released, please contact Siemens Service.

A.2

Protective measures

A.2

Take the following measures to protect both yourself and the 
patient.

A.2

A.2

A.2

CAUTION

A.2

Radiation in the scanning room after the 

Start

 key has been 

pressed!

A.2

Undesired radiation exposure.

A.2

✧

Leave the scanning room before initiating scanning or for 
interventional CT examinations, wear protective clothing.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments