manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 209 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 209

System Handling

Operation of the Patient Table

0.0

04/2012

0.0

C.2-7

0.0

C.2

✧

Press the

 table in

 key and hold it pressed until the table is 

correctly positioned.

The table top moves 

towards

 the gantry. The new table top posi-

tion (in mm) is shown on the display.

C.2

or

C.2

C.2

✧

Press the

 Table out

 key and hold it pressed until the table is 

correctly positioned.

The table top moves 

out of 

 the gantry. The new table top posi-

tion (in mm) is shown on the display.

C.2

Moving to the predefined ta-
ble position

C.2

C.2

✧

Apply the predefined position keys 

A

 or 

B

 to move the 

patient table into scanning position.

The table reaches the predefined positions preset from the 
Siemens Service.

C.2

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments