manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 346 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 346

0.0

0.0

Positioning the Patient

Operation

D.4-40

SOMATOM Spirit

0.0

D.4

✧

Position the reference phantom in such a way that the 
marking “TOP” points up toward the gantry.

✧

Position the patient in such a way that the lower part of the 
thoracic vertebrae and the lumber vertebral region are 
directly above the phantom.

✧

Position the patient supine with his or her arms crossed 
above his or her head.

D.4

CAUTION

D.4

Use of other than original Siemens Osteo Phantom!

D.4

Wrong diagnosis caused by wrong information.

D.4

✧

Only the original Siemens reference phantom must be 
used.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments