manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 277 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 277

Operation

Accessories for Patient Positioning

0.0

04/2012

0.0

D.3-11

0.0

Safety instructions

D.3

D.3

Warning label: Coronal 
prone head holder

D.3

D.3

Use of the coronal prone head holder!

D.3

Increased risk of the patient’s head hitting the gantry.

D.3

✧

Always watch the patient while the table is moving.

D.3

CAUTION

D.3

Improper use of positioning aids!

D.3

Injury of the patient or damage to the system are possible.

D.3

✧

Use the positioning aids exclusively for their original pur-
pose: head holder for positioning a head only, table top 
extension for positioning feet only.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments