Siemens SOMATOM Spirit Operator'S Manual Download Page 464

Page: 464 / 484

0.0

Glossary

M-6

SOMATOM Spirit

0.0

Dose

M.0

The total effect of radiation on a defined absorption volume of
the body.

M.0

Dual Topo

M.0

Combination of

two Topograms

with different tube positions

(AP and lateral).

M.0

Dynamic Multiscan

M.0

Scanning technique of continuous data acquisition of

multiple

scans

at the same slice position.

M.0

M.0

Exporting

M.0

Image data can be transferred to an external medium (

CD-R

MOD

, magnetic tape,

PACS

) for storage.

M.0

M.0

Fan beam device

M.0

CT system in which an arc-shaped detector array and an x-ray
tube generating a fan-shaped beam rotate about the patient.

M.0

File

M.0

Unit of data stored on the storage medium in the computer. A
file might be an image, a database or a program.

M.0

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Search results

Summary of Contents for SOMATOM Spirit

Reviews:

Siemens SOMATOM Spirit, Operator'S Manual, Page: 464 / 484

Search results

Summary of Contents for SOMATOM Spirit

Reviews: