Siemens SOMATOM Spirit Operator'S Manual Download Page 307

Page: 307 / 484

0.0

04/2012

0.0

D.4-1

0.0

CHAPTER

D.3

D.4

Positioning the Patient

This chapter gives you information about positioning the
patient.

D.4

We will start with important information about positioning.
Then, you will learn how to position the patient correctly.

D.4

After that, the standard accessories for positioning and their use
in various examinations is discussed.

D.4

In the last section, you will find out how to apply the optional
accessories for special examinations.

D.4

The CT images shown in this chapter are only examples.

D.4

System

D.4

It is assumed that you are already familiar with the system.

(→

Page B.1-1

System Overview

)

D.4

Positioning accessories

D.4

For information about the accessories available, please refer to

(→

Page D.3-1

Accessories for Patient Positioning

)

D.4

Safety

D.4

The safety information contained in this manual must be
observed, especially the following chapters

(→

Page A.1-1

General Safety Information

)

(→

Page A.2-1

Information about Personal Safety

)

(→

Page D.3-1

Accessories for Patient Positioning

)

D.4

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Search results

Summary of Contents for SOMATOM Spirit

Reviews:

Siemens SOMATOM Spirit, Operator'S Manual, Page: 307 / 484

Search results

Summary of Contents for SOMATOM Spirit

Reviews: