manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 242 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 242

0.0

0.0

Switching the System On and Off

Operation

D.1-8

SOMATOM Spirit

0.0

System checkup and calibration    

D.1

After 

syngo

 has started up, you should start system checkup 

and calibration to enable the system for scanning.

D.1

The checkup procedure is started in the 

Checkup

 dialog box 

which will be displayed after system startup. If the 

Checkup

 dia-

log box does not appear automatically, select 

Setup > Checkup

.

D.1

i

D.1

If the last checkup has been completed no longer than 12 hours 
ago, the time since the last complete checkup is indicated. It is 
recommended to perform the checkup or calibration once a day 
to assure best system performance.

D.1

You have the option of skipping the checkup. If necessary, you 
can calibrate the system later (

Setup > Calibration

).

D.1

D.1

D.1

CAUTION

D.1

The detector heating is switched off as long as the system is dis-
connected from the power supply. When you restart the system, 
the detector has not yet reached operating temperature!

D.1

Wrong diagnosis due to image artifacts.

D.1

✧

Calibrate the system as part of the check-up. Repeat calibra-
tion (

Setup > Calibration

) if ring artifacts occur.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments