manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 287 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 287

Operation

Accessories for Patient Positioning

0.0

04/2012

0.0

D.3-21

0.0

Safety instructions

D.3

Warning label: Insert pads

D.3

D.3

Use of insert pads!

D.3

Increased risk of the head of the patient hitting the gantry.

D.3

✧

Always watch the patient while the table is moving - espe-
cially if the gantry is tilted.

B

D.3

Do not use surgical spirit for cleaning. It could cause the surface 
material to become wrinkled.

D.3

Please note that the shape and dimensions of the head support 
may result in restrictions in operation.

D.3

Using the cushion set

D.3

✧

Attach the head holder to the head end of the table for 
positioning the head.

✧

Place the flat cushion or one of the head cushions in the 
head holder.

✧

Position the patient’s head in the desired position and 
immobilize the head with the pads on both sides.

✧

Run the restraint strap over the forehead of the patient and 
fasten it at the head support with the Velcro straps.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments