manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 332 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 332

0.0

0.0

Positioning the Patient

Operation

D.4-26

SOMATOM Spirit

0.0

✧

Position the head of the patient in the head holder.

✧

Place the knee support under both legs of the patient.

✧

Make sure that the patient pulls his or her shoulders down 
and is relaxed.

✧

Immobilize the head and, if necessary, use the pads and the 
Velcro straps.

✧

Place the arms of the patient next to the body.

✧

Make sure that there is no metal in the scanning area.

Positioning

D.4

The yellow segment in the schematic representation indicates 
starting position and radiation direction for topogram. 

D.4

D.4

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments