manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 314 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 314

0.0

0.0

Positioning the Patient

Operation

D.4-8

SOMATOM Spirit

0.0

Immobilizing the patient  

D.4

If necessary, immobilize the patient with one or more restraint 
straps, such that the patient is centered on the table with the 
extremities secured.

D.4

D.4

D.4

✧

Position the straps below the mat.

✧

Close them on top of the patient with the Velcro strip.

D.4

CAUTION

D.4

The restraint straps are not permanently attached to the table! 

D.4

They can not prevent the patient from falling off the table. 
Patients who do not keep still may fall off the table.

D.4

✧

Take special care with those patients.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments