manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 210 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 210

0.0

0.0

Operation of the Patient Table

System Handling

C.2-8

SOMATOM Spirit

0.0

Moving the patient table manually 

C.2

In an emergency or power failure, you can position the table top 
manually.

C.2

Moving the table top hori-
zontally

C.2

You can use the handle at the end of the table to move the table 
top out of the gantry.

C.2

C.2

✧

Press the lever towards the end of the table top and pull the 
table top out of the gantry.

B

.2

C

Before you continue work on the system, you must lock the 
tabletop back into its original position.

C.2

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments