manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 271 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 271

Operation

Accessories for Patient Positioning

0.0

04/2012

0.0

D.3-5

0.0

B

D.3

The pictures shown here are only examples. The appearance of 
the positioning aids depends on the system configuration. 

D.3

Attaching positioning aids

D.3

The head holder, table top extension and the head-arm support 
are all mounted in the same way at the head end of the table.

D.3

D.3

✧

Push the holding bracket into the receptacle at the head 
end of the table until it is firmly engaged.

i

D.3

The head holder has Velcro straps on both sides. Here, you 
attach the Velcro straps supplied to immobilize the head.

D.3

Removing positioning aids

D.3

D.3

✧

Press the release key from below and pull the positioning 
aid out of the receptacle.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments