Siemens SOMATOM Spirit Operator'S Manual Download Page 74 | Manualshive

Page: 74 / 484

Siemens SOMATOM Spirit Operator'S Manual Download Page 74

0.0

0.0

Mechanical Safety

Safety

A.3-2

SOMATOM Spirit

0.0

Maximum loads

A.3

The patient table and accessories are designed for certain max-
imum loads.

A.3

B

.3

A

Please observe the following instructions when positioning the
patient.

A.3

Patient table

A.3

The patient table has been designed to carry a maximum load
of 200 kg (440 lbs) in the center. The weight on the extended
part at the head end has to be derated.

A.3

B

.3

A

Make sure that obese patients, in particular, climb onto the
patient table as close to the center as possible.

A.3

Positioning aids

A.3

Bear in mind that only certain weights can be placed on posi-
tioning aids.

(→

Accessories for Patient Position-

)

A.3

«
...
72
73
74
75
76
...
»

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments