Siemens SOMATOM Spirit Operator'S Manual Download Page 448

Page: 448 / 484

0.0

Constancy Test of the Monitor

Quality Assurance

F.6-8

SOMATOM Spirit

0.0

Testing the homogeneity of
the image brightness

F.6

This test ascertains any deviations in the luminance (L) within
the image.

F.6

✧

Select test image 3.

✧

With the luminance meter measure a point close to the cen-
ter (L

center

) and four measuring points in the corners (L

cor-

ner

Maximum deviation of the corner points:

F.6

1. Cathode ray tube

35% (max.)

F.6

2. Flatscreen

20% (max.)

F.6

Calculation of the deviation in % = 100 x (L

center

- L

corner

) /

center

F.6

f B

Visual interference such as ghosting, artifacts, overshoots, light
or dark spots, flickering, and so on, encountered.

F.6

✧

Please consult your service technician.

F.6

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Search results

Summary of Contents for SOMATOM Spirit

Reviews:

Siemens SOMATOM Spirit, Operator'S Manual, Page: 448 / 484

Search results

Summary of Contents for SOMATOM Spirit

Reviews: