manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 29 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 29

Safety

General Safety Information

0.0

04/2012

0.0

A.1-7

0.0

Patients with implants

A.1

Possible interference from the CT with implants must be clari-
fied prior to examination.

A.1

A.1

Uncontrolled movements of 
the patient

A.1

Motion artifacts and/or injuries of the patient may occur if he/
she moves uncontrollably during acquisition.

A.1

✧

Immobilize the patient, if necessary.

Restraint straps

A.1

The restraint straps are not permanently attached to the table. 
Thus, they cannot prevent the patient from falling off the table.

A.1

✧

Make sure that the patient, especially a restless patient, 
does not fall off the table.

A.1

CAUTION

A.1

Scanning patients with implanted devices such as pacemakers 
or neuro stimulators!

A.1

Interferences may cause malfunctions of the implanted 
device.

A.1

✧

Observe the patient closely during examination.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments