manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 238 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 238

0.0

0.0

Switching the System On and Off

Operation

D.1-4

SOMATOM Spirit

0.0

Login as a different user

D.1

If you wish to log onto the system as a different user (for exam-
ple, for service reasons), you must interrupt automatic login.

D.1

✓

The application is running.

✧

Call up 

System > End

 in the main menu.

The 

End Session

 dialog box is displayed.

D.1

✧

Click 

Restart Application

 and confirm your choice.

✧

Press the 

Shift

 button and keep pressed during application 

startup.

The login dialog box is displayed.

D.1

✧

Enter a user name and, if necessary, a password and con-
firm your entries.

Booting is continued.

D.1

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments