manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 122 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 122

0.0

0.0

Software Related Safety Information

Safety

A.4-38

SOMATOM Spirit

0.0

Exiting the program

A.4

In the 

End Session

 dialog box, you have various possibilities to 

end your session and to shut down your system.

A.4

A.4

A.4

A.4

CAUTION

A.4

Switch user, shut down, logoff or restart without saving data!

A.4

Possible loss of unsaved changes.

A.4

✧

Save data before switching user, shutting down or restart-
ing the system.

A.4

CAUTION

A.4

Switching off the computer in Stand-by mode or without shut-
ting down!

A.4

Possible loss of data, data corruption or system damage.

A.4

✧

Shut down the computer before switching off.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments