manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 43 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 43

0.0

04/2012

0.0

A.2-1

0.0

CHAPTER

A.1

A.2

Information about 
Personal Safety

This chapter describes how you and the personnel can ensure 
personal safety, the safety of the patient and of people accom-
panying the patient.

A.2

You will learn at which locations there is danger of collision, 
damage, and injury during system movements and how you can 
stop system movements in case of an emergency.

A.2

You will also be informed about radiation protection and what 
artifacts can occur.

A.2

Positioning

A.2

If the system is operated correctly and the patient is correctly 
positioned, there is very little risk of injury to the patient or per-
sonnel.

A.2

B

.2

A

Please also observe 

(→

Page A.1-5 

General practice

)

A.2

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments