manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 388 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 388

0.0

0.0

Constancy Test

Quality Assurance

F.3-4

SOMATOM Spirit

0.0

Selecting the tests

F.3

The single functions of the constancy test are preselected with 
a checkmark. However, you can add additional tests (for exam-
ple, CTDI measurements) or uncheck selected tests.

F.3

F.3

✧

Click the tests that you want to include in addition in this 
constancy test.

✧

Deselect the tests that you do not require by clicking them 
again.

Selecting constancy or refer-
ence measurements

F.3

Evaluation of the constancy test results are based on a compar-
ison with reference data that are stored in your system. These 
are determined by Siemens Service.

F.3

If you have any of the system parts replaced (for example, 
tubes), the reference data must be determined again. You can 
do this with a reference measurement.

F.3

F.3

✧

Click the field 

Reference/NORMAL

 to toggle between a 

normal constancy measurement and a reference measure-
ment.

F.3

In reference mode, the individual selected tests are marked by 
an “R”. The test results will be used as reference data in the 
future.

F.3

B

.3

F

We recommend that Siemens Service always performs your ref-
erence measurements.

F.3

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments