Siemens SOMATOM Spirit Operator'S Manual Download Page 201

Page: 201 / 484

System Handling

Operation of the Gantry

0.0

04/2012

0.0

C.1-3

0.0

Tilting the gantry forward
(positive direction)

C.1

C.1

✧

Press the lower key and hold it down as long as you want
the tilting movement to continue.

The gantry is inclined such that the top of it moves toward the
patient table (positive angle).

C.1

If the following positions have been reached, the tilting stops
automatically:

C.1

❏

Vertical position (0 position)

❏

Maximal positive or negative angle

❏

Final position defined by the current table position or scan
program

To continue movement release the key and press it again.

C.1

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Search results

Summary of Contents for SOMATOM Spirit

Reviews:

Siemens SOMATOM Spirit, Operator'S Manual, Page: 201 / 484

Search results

Summary of Contents for SOMATOM Spirit

Reviews: