Siemens SOMATOM Spirit Operator'S Manual Download Page 336

Page: 336 / 484

0.0

Positioning the Patient

Operation

D.4-30

SOMATOM Spirit

0.0

Examinations of the thoracic
and lumbar vertebrae

D.4

D.4

(1) Head-arm support with straps and cushion (optional)

(2) Straps (optional)

(3) Knee support

✧

Position the head of the patient in the head-arm support.

✧

Position the patient so that he or she is lying supine with his
or her arms crossed above the head. Immobilize the hands
with the Velcro straps.

✧

When positioning the table top or tilting the gantry, make
sure that the knees and the arms do not collide with the
gantry.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Search results

Summary of Contents for SOMATOM Spirit

Reviews:

Siemens SOMATOM Spirit, Operator'S Manual, Page: 336 / 484

Search results

Summary of Contents for SOMATOM Spirit

Reviews: