manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 45 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 45

Safety

Information about Personal Safety

0.0

04/2012

0.0

A.2-3

0.0

A.2

CAUTION

A.2

Improper patient positioning!

A.2

Possible injury of the patient by moving parts.

A.2

✧

Ensure that neither the patient’s clothing nor hair can get 
caught in mechanical parts.

✧

It is very important to ensure that infusion lines and respi-
ration tubes, catheters and ECG cables cannot get caught in 
the space between the table top and the side parts. These 
components must not be put under tensile stress in any 
other way.

✧

Make sure that patient bedding cannot get caught between 
the parts of the patient table.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments