manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 145 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 145

System Description

Scan Unit (Gantry)

0.0

04/2012

0.0

B.2-7

0.0

Position displays  

B.2

B.2

(1) Gantry tilt

(2) Horizontal table position

(3) Table height

The display value of the gantry tilt indicates the inclination of 
the gantry from the vertical position (0).

B.2

The display value of the horizontal table position indicates the 
position of the table top (in mm) with reference to a reference 
zero position, generally an anatomical marking. Table top move-
ment into the gantry opening is displayed as a negative value 
and movement out of the gantry opening as a positive value.

B.2

The display value of the vertical table position indicates the 
table height (in mm) relative to the center axis of the gantry.

B.2

Radiation warning lamps 

B.2

B.2

The radiation warning lamps on the gantry operator panels, on 
the control box as well as site radiation warning lamps to be pro-
vided by the customer must light up if scanning has been trig-
gered. 

B.2

When the radiation display (optional) is on the top of the front 
cover, it must light up as well if scanning has been triggered. 

B.2

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments