manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 100 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 100

0.0

0.0

Software Related Safety Information

Safety

A.4-16

SOMATOM Spirit

0.0

syngo Neuro Perfusion CT

A.4

syngo 

Neuro Perfusion CT provides images of blood flow, blood 

volume and time to peak from one set of dynamic CT images.

A.4

Image prerequisites

A.4

syngo 

Neuro Perfusion CT was designed and tested for the pro-

cessing of dynamic image sequences of the brain on SOMATOM 
CT systems.

A.4

A.4

A.4

CAUTION

A.4

Image requirements for the intended perfusion calculation not 
fulfilled!

A.4

Misleading interpretation of results.

A.4

✧

Take special care when processing dynamic CT images 
other than SOMATOM CT image data.

✧

If processing other levels of the brain, ensure that the slice 
contains the occipital segment of the superior sagittal sinus 
above the confluence of sinuses.

✧

Only use data that have been acquired or reconstructed 
with a sampling rate of at least 1 image per second.

✧

Note that the primary anatomy that the software expects 
for its semi-automatic analysis are standard slices through 
the basal ganglia.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments