Siemens SIMATIC NET Page 385 Configuration Manual Download

Page: 385 / 464

Security and authentication

10.1 User rights management

SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05

385

Syntax

Call up the command with the following parameters:

user-account <string> password <passwd> privilege {user | admin}

The parameters have the following meaning:

Parameter

Description

Range of values / note

string

User name

Enter a user name. The name must be

unique.
The name must meet the following condi-

tions:

•

It must be unique.

•

It must be between 1 and 32 charac-

ters long.

•

The following characters must not be

included: § ? " ; : < =

password

Keyword for a password

passwd

Value for the password

Enter the password.
The password must be at least 6 charac-

ters long.

privilege

Keyword for the role of the user

user

The user only has read rights.

admin

The user can create, edit or delete

entries.

Result

The new user has been created or the password / role has been changed.

Note
User name cannot be changed
After creating a user, the user name can no longer be modified because the user name is

used for encryption of the password. If a user name needs to be changed, the user must be

deleted and a new user created.

Further notes

You delete a user with the

no user-account

command.

You show the created users with the

show user-accounts

command.

Summary of Contents for SIMATIC NET

















































































































































































































































































































































































































































































Search results

Summary of Contents for SIMATIC NET

Reviews:

Related manuals for SIMATIC NET

Brands by name

Popular brands

Siemens SIMATIC NET, Configuration Manual

Search results

Summary of Contents for SIMATIC NET

Reviews:

Related manuals for SIMATIC NET

Brands by name

Popular brands