Ruckus Wireless ZoneDirector 1200 User Manual Download Page 90

Page: 90 / 361

Enter the admin

Password

, and re-enter the same password for confirmation. The

Admin account need not have write privileges, but must able to read and search all
users in the database.

Click

to save changes.

To test your authentication settings, see

Testing Authentication Settings

on page 106.

Figure 52: Active Directory with Global Catalog enabled

LDAP

In addition to Microsoft Active Directory, ZoneDirector supports several of the most
commonly used LDAP servers, including:

• OpenLDAP
• Apple Open Directory
• Novell eDirectory
• Sun JES (limited support)

To configure an LDAP server for user authentication:

Go to

Configure

AAA Servers

, and click

Create New

under

Authentication/Accounting Servers. The

Create New

form appears.

Type

, Select

LDAP

• In Encryption, select Enable TLS encryption if you want to encrypt all LDAP

authentication traffic between the LDAP client and the LDAP server. The LDAP
server must support TLS1.0/TLS1.1/TLS1.2.

NOTE

Note that Secure LDAP requires the import of a root CA for TLS encryption.

The import option is provided on the

Configure

Certificate

Advanced

Options

page

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

Configuring Security and Other Services

Using an External AAA Server

Summary of Contents for ZoneDirector 1200









































































































































































































































































































































































Search results

Summary of Contents for ZoneDirector 1200

Reviews:

Brands by name

Popular brands

Ruckus Wireless ZoneDirector 1200, User Manual

Search results

Summary of Contents for ZoneDirector 1200

Reviews:

Brands by name

Popular brands