Description
Trap Name
Triggered when an AP’s
online client limit has been
exceeded.
ruckusZDEventAPclientValve
An AP's CPU utilization has
exceeded the set value.
ruckusZDEventAPCPUvalve
An AP's memory utilization
has exceeded the set value.
ruckusZDEventAPMEMvalve
The standby Smart
Redundancy ZoneDirector
has failed to detect its active
peer, system changed to
active state.
ruckusZDEventSmartRedundancy ChangetoActive
The active Smart
Redundancy ZoneDirector
has detected its peer and is
in active/connected state
ruckusZDEventSmartRedundancy ActiveConnected
The active Smart
Redundancy ZoneDirector
has not detected its peer
and is in
active/disconnected state.
ruckusZDEventSmartRedundancy ActiveDisconnected
The standby ZoneDirector
has detected its peer and is
in standby/connected state.
ruckusZDEventSmartRedundancy StandbyConnected
The standby ZoneDirector
has not detected its peer
and is in
standby/disconnected
state.
ruckusZDEventSmartRedundancy StandbyDisconnected
Enabling Telnet
By default, Telnet is disabled due to security considerations, as SSH is the preferred
method if you need to access the ZoneDirector CLI. In some situations however, you
may want to enable Telnet.
To enable Telnet:
1.
Go to
Configure
>
System
2.
Scroll down to the bottom of the page and expand the
Network Management
section.
3.
Locate the
Telnet Server
section, and click the box next to
Enable Telnet Server
.
75
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
Configuring System Settings
Enabling Network Management Systems
