Adjusting AP Settings
1.
Go to
Configure
>
Access Points
.
2.
Review the
Access Points
table and identify an AP that you want to adjust.
3.
Click the
Edit
button in that AP row.
4.
Review and adjust any of the following Editing (AP) options.
NOTE
Some options are read-only depending on the approval status.
•
Channelization
: Choose 20/40/80MHz or Auto channel width.
•
Tx Power
: Choose the amount of power allocated to this channel. The default
setting is "Auto" and your options range from "Full" to "Min."
•
Mesh Mode
: Use this setting to manually configure this AP's Mesh role (Root
AP, Mesh AP, or Disable). Default is Auto.
•
Uplink Selection
: Use this setting to manually define which APs can serve as an
uplink for this Mesh AP.
5.
Click
OK
. The adjusted AP will be automatically restarted, and when it is active, will
be ready for network connections.
Prioritizing WLAN Traffic
If you want to prioritize internal traffic over guest WLAN traffic, for example, you can set
the WLAN priority in the WLAN configuration settings to "high" or "low." By default all
WLANs are set to high priority.
To set a specific WLAN to lower priority:
1.
Go to
Configure
>
WLANs
2.
Click the
Edit
link next to the WLAN for which a lower priority will be set.
3.
Select
Low
next to
Priority
, and click
OK
.
