Description
Setting
Use this section to configure max clients, LEDs and port
settings for all APs of each specific model that are members
of the group. See
Modifying Model Specific Controls
on page 198.
Model Specific
Control
The Group Settings section is used to move access points
between groups. See
Modifying Access Point Group Membership
on page 197.
Group Settings
Figure 133: Editing the System Default access point group settings
Creating a New Access Point Group
To create a new AP group with custom settings:
1.
Go to
Configure
>
Access Points
.
2.
In the
Access Point Groups
section, click the
Create New
button.
3.
Enter a
Name
and optionally a
Description
for the new AP group.
4.
Modify any of the settings that you want to apply to the new AP group, and click
OK
to save your changes.
Modifying Access Point Group Membership
When more than one AP group exists, you can move APs between groups using the
Group Settings section of the Editing [AP Group] form. The Group Settings section is
divided into two subsections:
•
Members
: Lists the current member APs of this AP group.
•
Access Points
: Lists the APs that are members of other AP groups.
197
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
Managing Access Points
Working with Access Point Groups
