Reviewing a List of Previously Blocked Clients
1.
Go to
Configure
>
Access Control
.
2.
Review the
Blocked Clients
table.
3.
You can unblock any listed MAC address by clicking the
Unblock
button for that
address.
Figure 69: Unblocking a previously blocked client
Configuring Client Isolation White Lists
When Wireless Client Isolation is enabled on a WLAN, all communication between clients
and other local devices is blocked at the Access Point. To prevent clients from
communicating with other nodes, the Access Point drops all ARP packets from stations
on the WLAN where client isolation is enabled and which are destined to IP addresses
that are not part of a per-WLAN white list.
You can create exceptions to client isolation (such as allowing access to a local printer,
for example) by creating Client Isolation White Lists.
To create a Client Isolation White List:
1.
Go to
Configure
>
Access Control
>
.
2.
Expand the
Client Isolation White List
section, and click
Create New
.
NOTE
You can also create a Client Isolation White List while creating a WLAN from
within the WLAN configuration screen (
Configure
>
WLANs
>
Create New
>
Wireless
Client Isolation
>
Create New
).
3.
Enter a
Name
and optionally a
Description
for the access policy.
4.
In
Rules
, you can create multiple device-specific rules for each device to be white
listed.
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
112
Configuring Security and Other Services
Controlling Network Access Permissions
