Figure 29: The All Events/Activities page
Customizing the Current Log Settings
You can review and customize the log settings by following these steps:
1.
Go to
Configure
>
System
.
2.
Scroll down to the
Log Settings
section.
3.
Make your selections from these syslog server options:
•
Event Log Level
: Select one of the three logging levels: “Show More,” “Warning
and Critical Events,” or “Critical Events Only.”
•
Remote Syslog
: To enable syslog logging, select the
Enable reporting to remote
syslog server at
check box, and then type the IP address in the box provided.
•
Inherit remote syslog server for APs __ (IP Address)
: Enabling this feature
allows ZoneDirector to supply client association information to a third party
application that can then deploy ACL policies to a firewall based on client
association information such as user name, IP, MAC address, etc. First,
ZoneDirector retrieves client association information, then reorganizes the
information and sends it to the syslog server, from which it can be collected by
the third party software and sent it to the firewall for access restriction based on
client association information.
4.
Click
Apply
to save your settings. The changes go into effect immediately.
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
58
Configuring System Settings
Changing the System Log Settings
