Figure 27: The System Time options
Setting the Country Code
Different countries and regions maintain different rules that govern which channels can
be used for wireless communications. Setting the Country Code to the proper regulatory
region ensures that your ZoneFlex network does not violate local and national regulatory
restrictions. ZoneDirector’s web interface can be used to define the country code for all
APs under its control.
To set the Country Code to the proper location:
1.
Go to
Configure
>
System
.
2.
Locate the
Country Code
section, and choose your location from the pull-down
menu.
3.
Click
Apply
to save your settings.
Figure 28: The Country Code settings
Channel Optimization
If your Country Code is set to "United States," an additional configuration option, Channel
Optimization, is shown. This feature allows you to choose whether additional DFS
(Dynamic Frequency Selection) channels in the 5 GHz band should be available for use
by your APs.
Note that these settings only affect Ruckus Wireless APs that support the extended DFS
channel list. Channel Optimization settings are described in the following table.
55
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
Configuring System Settings
Setting the Country Code
