8.
The remote host interface list on the right updates. Select wifi0 from the list if you are
streaming on the 2.4 GHz radio, or select wifi1 if streaming on the 5 GHz radio.
9.
Click
Start
. Wireshark displays the packet stream in a new window.
Figure 258: Add APs from Currently Managed APs list to Capture APs list
Figure 259: Click Start to begin packet capture; click Remove to remove APs from the list
Using Ruckus Custom Indicators
Packets captured on Ruckus APs include some information that is not available when
capturing from other Wi-Fi devices. This additional information is stored in the Per-Packet
Information (PPI) header that precedes the over-the-air content.
1.
The PPI:802.11-Common Header antenna signal and antenna noise fields of packets
transmitted by the AP contain the next-to-lowest byte and the lowest byte,
respectively, of the antenna pattern used to transmit the packet. On some APs, the
pattern value may contain more significant bits, which are not stored in this header.
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
350
Troubleshooting
Packet Capture and Analysis
