•
on page 16
Figure 1: ZoneDirector 1200
Buttons, Ports, and Connectors
The following table describes the buttons, ports and connectors on ZoneDirector 1200.
Table 3: ZoneDirector 1200 front panel elements
Description
Label
Use the Reset button to restart ZoneDirector.
Reset
Two auto negotiating 10/100/1000Mbps Ethernet ports.
10/100/1000 Ethernet
RJ-45 Console port for accessing the ZoneDirector command
line interface.
Console
Factory Default button. To reset ZoneDirector to factory default
settings, press and hold the F/D button for at least five (5)
seconds. For more information, refer to
Alternate Factory Default Reset Method
on page 323.
NOTE
Resetting ZoneDirector to factory default settings will
erase all configuration changes that you made, except for AP
licenses and SSL certificates.
F/D
Front Panel LEDs
The following table describes the LEDs on the front panel of ZoneDirector 1200.
Table 4: ZoneDirector ZoneDirector 1200 LED descriptions
Meaning
State
LED Label
ZoneDirector is receiving power.
Solid Green
Power
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
16
Introducing ZoneDirector
ZoneDirector Physical Features
