manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, User Manual

Share
Download
Ruckus Wireless ZoneDirector 1200 User Manual Download Page 132

Figure 86: Create an AP site Bonjour policy

Applying a Bonjour Policy to an AP

Once you have created an AP site Bonjour policy, you will need to designate the AP that
will be responsible for implementing this policy.

To enable Bonjour policy on an AP:

1.

Go to 

Configure

 > 

Access Points

.

2.

Click 

Edit

 next to the AP you want to configure.

3.

In 

Bonjour Gateway

, enable the check box and select a Bonjour policy that you

created on the 

Configure

 > 

Bonjour Gateway

 page from the list.

4.

Click 

OK

 to save your changes.

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

132

Configuring Security and Other Services

Bonjour Gateway

Summary of Contents for ZoneDirector 1200










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands