Figure 25: To view current DHCP clients, click the "click here" link
Controlling ZoneDirector Management Access
The
Management Access Control
option can be used to control access to
ZoneDirector's management interface.
The
Management Access Control
interface is located on the
Configure
>
System
screen. Options include limiting access by subnet, single IP address and IP address
range. When you create a management access control rule, all IP addresses and subnets
other than those specifically listed will be blocked from accessing ZoneDirector's web
interface.
To restrict access to ZoneDirector's web interface:
1.
Go to
Configure
>
System
.
2.
Locate the
Management Access Control
section, and click the
Create New link
.
3.
In the
Create New
menu that appears, enter a name for the user(s) that you want to
allow access to ZoneDirector's web interface.
4.
Enter an IP address, address range or subnet. The administrator's current IP address
is shown for convenience.
CAUTION!
Be sure that you do not create an ACL that blocks the admin's own IP
address from accessing the web interface.
5.
Click
OK
to confirm. You can create up to 16 entries to the Management ACL.
53
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
Configuring System Settings
Controlling ZoneDirector Management Access
