manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, User Manual

Share
Download
Ruckus Wireless ZoneDirector 1200 User Manual Download Page 250

Figure 180: The Onboarding Portal for mobile devices

If the user clicks the Guest Access button, the process is the same as when connecting
to a Guest WLAN and all settings on the Guest Access configuration page will be put
into effect.

Figure 181: Guest Access welcome and terms of use screens

If the user clicks the Register Device button, the web page will be redirected to the WLAN
Connection Activation page, from which the user can enter user name and password
to activate this device. A Zero-IT activation file is generated for download once the client
is registered with ZoneDirector.

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

250

Managing Guest Access

Using the BYOD Onboarding Portal

Summary of Contents for ZoneDirector 1200










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands